Multichannel Systems provide high channel count solutions for signal conditioning applications such as anti-aliasing in digital signal processing, separating specific bandwidths of information, enhancing signal-to-noise ratio, low noise pre-amplification and more. Five-slot and 16-slot chassis are available for total channel counts from 1 to 32. All filter/amplifier cards plug-in from the rear panel and are controlled via the front panel keyboard or over the GPIB interface.

• Filter Types: Butterworth and Bessel
• Roll-Off Rates: 24dB and 48dB/Octave
• 5 or 16 Plug-In Filter Cards
• Up to 32 Channels
• Non-Volatile Memory
• Input and Output Gain
• All Channel Mode
• Amplify Only and By-Pass Modes
• Fully GPIB Programmable
• Overload Detectors
• Power-Up Self-Test

3916C 16 Slot Chassis

3905C 5 Slot Chassis

• Dual Channel
• 3Hz to 2MHz
• 24dB/Octave
• Low-Pass, High-Pass
• Band-Pass, Band-Reject
• Butterworth/Bessel
• Pre and Post Filter Gain

• Single Channel
• 170Hz to 25.6MHz
• 24dB/Octave
• Butterworth Low-Pass
• Pre and Post Filter Gain

• Single Channel
• 0.03Hz to 1MHz, Low-Pass
• 0.03Hz to 300kHz, High-Pass
• 48dB/Octave
• Butterworth/Bessel
• Pre and Post Filter Gain

34A Plug-In Filter Card

35 Plug-In Filter Card

38 Plug-In Filter Card

Available Plug-In Filter Card for 3905C and 3916C Chassis

Krohn-Hite Corporation, 15 Jonathan Drive, Unit 4, Brockton, MA 02301-5566
Tel: 508-580-1660; Fax: 508-583-8989; sales@krohn-hite.com; service@krohn-hite.com

About Krohn-Hite | Privacy Policy | Terms and Conditions